Lancer L4-2.4L SOHC (2005)
STEP 4. Check the wiring harness between windshield wiper motor connector B-01 (terminal 4) and the ignition switch (ACC).
NOTE: Also check intermediate connector C-123, junction block connectors C-210 and C-211 for loose, corroded, or damaged terminals, or terminals
pushed back in the connector. If intermediate connector C-123 or junction block connectors C-210 or C-211 are damaged, repair or replace the damaged
component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between windshield wiper motor connector B-01 (terminal 4) and the ignition switch (ACC) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The windshield wiper should stop at the predetermined park position.
