Lancer L4-2.4L SOHC (2005)
STEP 9. Check the wiring harness between windshield washer motor connector A-22 (terminal 2) and front-ECU connector A-11X (terminal
21).
NOTE: Also check intermediate connectors C-111 and C-129 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If
intermediate connectors C-111 or C-129 are damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between windshield washer motor connector A-22 (terminal 2) and front-ECU connector A-11X (terminal 21) in good
condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the windshield washer works normally.
H - Charts
Seat Belt Warning Light: The seat belt warning light does not work normally.
