Lancer L4-2.4L SOHC (2005)
STEP 12. Check headlight (RH) connector A-21 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is headlight (RH) connector A-21 in good condition?
YES: Go to Step 13.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the headlights illuminate normally.
STEP 13. Check headlight (RH) bulb.
1. Remove the headlight (RH) bulb.
2. Verify that the headlight (RH) bulb is not damaged or burned out.
Q: Is headlight (RH) bulb normal?
YES: Go to Step 14.
NO: Replace the headlight (RH) bulb. Verify that the headlights illuminate normally.
STEP 14. Check front-ECU connector A-10X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front-ECU connector A-10X in good condition?
YES: Go to Step 15.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the headlights illuminate normally.
