Lancer L4-2.4L SOHC (2005)
Normal conditions are displayed for all the items : Go to Step 3.
Normal condition is not displayed for "IG SW (IG1)" : Refer to Inspection Procedure M-2 "ETACS-ECU does not receive any signal from the
ignition switch (IG1)"
Normal condition is not displayed for "F.FOG LIGHT" : Refer to Inspection Procedure M-9 "ETACS-ECU does not receive signals from the
fog light switch."
STEP 3. Check fog light relay connector A-04X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is fog light relay connector A-04X in good condition?
YES: Go to Step 4.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Check that the fog lights illuminate normally.