mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2006 > < Initial Inspection and Diagnostic Overview|Page 2004
Page 332
background image

STEP 19. Check luggage compartment light switch connector F-09 for loose, corroded or damaged terminals, or terminals pushed back in the
connector
.

Q: Is luggage compartment light switch connector F-09 in good condition?

YES: Go to Step 20.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the luggage compartment lights illuminate
normally.

STEP 20. Check the luggage compartment light switch.
Disconnect luggage compartment light switch connector F-09. Then check the continuity between the switch and ground.

Q: Is the luggage compartment light switch in good  condition?

YES: Go to Step 21.

NO:  Replace the luggage compartment light switch. Verify  that the luggage compartment lights illuminate  normally.

STEP 21. Check the wiring harness between luggage compartment light connector F-02 (terminal 2) and luggage compartment light switch
connector F-09 (terminal 1)
.

Initial Inspection and Diagnostic Overview|Page 2006 > < Initial Inspection and Diagnostic Overview|Page 2004