Lancer L4-2.4L SOHC (2005)
STEP 7. Check column switch connector C-206 and ETACS-ECU connector C-228 for loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Are column switch connector C-206 and ETACS-ECU connector C-228 in good condition?
YES: Go to Step 8.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. The system should communicate with the column switch
(column-ECU) normally.
STEP 8. Check the wiring harness between column switch connector C-206 (terminal 2) and ETACS-ECU connector C-228 (terminal 68).
Q: Is the wiring harness between column switch connector C-206 (terminal 2) and ETACS-ECU connector C-228 (terminal 68) in good condition?
YES: Go to Step 9.
