Lancer L4-2.4L SOHC (2005)
STEP 8. Check ETACS-ECU connector C-228 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector C-228 in good condition?
YES: Go to Step 9.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. The system should communicate with the sunroof motor
assembly (sunroof-ECU) normally.
STEP 9. Check the wiring harness between sunroof motor assembly connector D-32 (terminal 10) and ETACS-ECU connector C-228 (terminal
59).
NOTE: Also check intermediate connector C-18 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector C-18 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between sunroof motor assembly connector D-32 (terminal 10) and ETACS-ECU connector C-228 (terminal 59) in good
