Lancer L4-2.4L SOHC (2005)
STEP 4. Check the wiring harness between ETACS-ECU connector C-226 (terminal 2) and fusible link (1).
NOTE: Also check junction block connector C-212 and intermediate connector C-126 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If junction block connector C-212 or intermediate connector C-126 are damaged, repair or replace the damaged component(s) as
described in Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-226 (terminal 2) and fusible link (1) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the central door locking system works normally.
