Lancer L4-2.4L SOHC (2005)
2) in good condition?
YES: Replace the ETACS-ECU. Verify that all the doors can be locked and unlocked normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that all the doors can be locked and unlocked normally.
STEP 14. Check door lock actuator (rear: RH) connector E-18 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is door lock actuator (rear: RH) connector E-18 in good condition?
YES: Go to Step 15.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that all the doors can be locked and unlocked
normally.
STEP 15. Check the door lock actuator (rear: RH).
1. Remove the door lock actuator (rear: RH), and check it. Refer to Door Handle and Latch.
2. Follow the table to check the door lock actuator (rear: RH) for correct operation.
