Lancer L4-2.4L SOHC (2005)
1. Operate the MUT-III as follows:
a. Select "SYSTEM SELECT.
b. Select "SWS.
c. Select "SWS MONITOR.
d. Select "DATA LIST.
e. Select "ETACS ECU.
2. Check that normal conditions are displayed on the items described in the table.
Q: Is normal condition displayed?
YES: Go to Step 3.
NO: Refer to Inspection Procedure M-2 "ETACS-ECU does not receive any signal from the ignition switch (IG1)."