Lancer L4-2.4L SOHC (2005)
-
The power window motor (rear: RH) may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tool:
-
MB991223: Harness Set
STEP 1. Check power window main switch connector E-05 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is power window main switch connector E-05 in good condition?
YES: Go to Step 2.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection.
STEP 2. Check each switch on the power window main switch for continuity.
1. Remove the power window main switch. Refer to Door-Door Trim and Waterproof Film.