mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2243 > < Initial Inspection and Diagnostic Overview|Page 2241
Page 119
background image

YES: Go to Step 24.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. When the power window sub-switch (rear: RH) is
operated, the rear power window (RH) should open or close normally.

STEP 24. Check the power window sub-switch (rear: RH) for continuity.

1. Remove the power window sub-switch (rear: RH). Refer to Door-Door Trim and Waterproof Film.

2. Check continuity when the power window sub-switch (rear: RH) is operated to "UP" or "DOWN" position.

Q: Is the power window sub-switch (rear: RH) normal?

YES: Go to Step 25.

NO: Replace the power window sub-switch (rear: RH). When the power window sub-switch (rear: RH) is operated, the rear power window (RH)
should open or close normally.

STEP 25. Check the power window motor (rear: RH).

1. Remove the rear power regulator assembly (RH). Refer to Door-Door Glass and Regulator.

Initial Inspection and Diagnostic Overview|Page 2243 > < Initial Inspection and Diagnostic Overview|Page 2241