mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2261 > < Initial Inspection and Diagnostic Overview|Page 2259
Page 137
background image

STEP 21. Check rear horn relay connector A-05X and ETACS-ECU connector C-227 for loose, corroded or damaged terminals, or terminals
pushed back in the connector
.

Q: Are horn relay connector A-05X and ETACS-ECU connector C-227 in good condition?

YES: Go to Step 22.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the horn sounds normally.

Initial Inspection and Diagnostic Overview|Page 2261 > < Initial Inspection and Diagnostic Overview|Page 2259