mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2300 > < Initial Inspection and Diagnostic Overview|Page 2298
Page 176
background image

STEP 5. Check front-ECU connector A-11X for loose, corroded or damaged terminals, or terminals pushed back in the connector.

Q: Is front-ECU connector A-11X in good condition?

YES: Go to Step 6

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. The windshield wiper should stop at the predetermined
park position.

Initial Inspection and Diagnostic Overview|Page 2300 > < Initial Inspection and Diagnostic Overview|Page 2298