Lancer L4-2.4L SOHC (2005)
STEP 3. Check the wiring harness between rear combination light assembly (LH) connector F-14 (terminal 3) and front-ECU connector A-10X
(terminal 8).
NOTE: Also check junction block connectors C-210, C-217 and intermediate connector C-129 for loose, corroded, or damaged terminals, or terminals
pushed back in the connector. If junction block connectors C-210, C-217 or intermediate connector C-129 are damaged, repair or replace the damaged
component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between rear combination light assembly (LH) connector F-14 (terminal 3) and front-ECU connector A-10X (terminal 8) in
good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The taillight (LH) and the license plate lights should illuminate normally.
