Lancer L4-2.4L SOHC (2005)
STEP 16. Check front-ECU connector A-10X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front-ECU connector A-10X in good condition?
YES: Go to Step 17.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the position light (RH) illuminates normally.
STEP 17. Check the wiring harness between position light (RH) connector A-24 (terminal 2) and front-ECU connector A-10X (terminal 8).
Q: Is the wiring harness between position light (RH) connector A-24 (terminal 2) and front-ECU connector A-10X (terminal 8) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the position light (RH) illuminates normally.
