Lancer L4-2.4L SOHC (2005)
component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between license plate light (RH) connector F-10 (terminal 2) and front-ECU connector A-10X (terminal 8) in good condition?
YES: Replace the license plate light socket. Verify that the license plate light (RH) illuminates normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the taillight (RH) illuminates normally.
STEP 47. Check position light (LH) connector A-14 and front-ECU connector A-10X for loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Are position light (LH) connector A-14 and front-ECU connector A-10X in good condition?
YES: Go to Step 48.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the position light (LH), taillight (LH), license
plate light illuminates normally.