Lancer L4-2.4L SOHC (2005)
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the headlights illuminate normally.
STEP 20. Check headlight (RH) connector A-21 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is headlight (RH) connector A-21 in good condition?
YES: Go to Step 21.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the headlights illuminate normally.
STEP 21. Check headlight (RH) bulb.
1. Remove the headlight (RH) bulb.
2. Verify that the headlight (RH) bulb is not damaged or burned out.
Q: Is headlight (RH) bulb normal?
YES: Go to Step 22.
NO: Replace the headlight (RH) bulb. Verify that the headlights illuminate normally.
STEP 22. Check front-ECU connector A-10X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front-ECU connector A-10X in good condition?
YES: Go to Step 23.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the headlights illuminate normally.
