Lancer L4-2.4L SOHC (2005)
1. Connect scan tool MB991958 to the data link connector.
2. Connect SWS monitor kit MB991813 to the column switch connector.
3. Operate scan tool MB991958 according to the procedure below to display "H/L AUTO-CUT."
a. Select "SYSTEM SELECT."
b. Select "SWS."
c. Select "SWS MONITOR."
d. Select "FUNCTION DIAG."
e. Select "LIGHTING."
f.
Select "H/L AUTO-CUT."
4. Check that normal conditions are displayed on the items described in the table.
5. When the driver's door is opened, check that normal conditions are displayed on the items described in the table.
Q: Are normal conditions displayed on the "TAILLIGHT SW", "IG SW (IG1)", "FRONT DOOR SW" and "H/L AUTO-CUT"?
