Lancer L4-2.4L SOHC (2005)
STEP 6. Check the wiring harness between fog light relay connector A-04X (terminal 2 and 4) and the battery.
Q: Is the wiring harness between fog light relay connector A-04X (terminal 2 and 4) and the battery in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the fog lights illuminate normally.
STEP 7. Check front-ECU connector A-10X for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is front-ECU connector A-10X in good condition?
YES: Go to Step 8.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the fog lights illuminate normally.