Lancer L4-2.4L SOHC (2005)
STEP 13. Check the wiring harness between rear dome light connector D-07 (terminal 2) and ETACS-ECU connector C-226 (terminal 5).
NOTE: Also check junction block connector C-218 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If junction
block connector C-218 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between rear dome light connector D-07 (terminal 2) and ETACS-ECU connector C-226 (terminal 5) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the rear dome lights illuminate normally.
STEP 14. Check luggage compartment light connector F-02 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is luggage compartment light connector F-02 in good condition?
YES: Go to Step 15.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that the luggage compartment lights illuminate
normally.
STEP 15. Verify the luggage compartment light bulb.
Q: Is the luggage compartment bulb in good condition?
YES: Go to Step 16
