Lancer L4-2.4L SOHC (2005)
STEP 18. Check the wiring harness between luggage compartment light connector F-02 (terminal 1) and ETACS-ECU connector C-226
(terminal 6).
NOTE: Also check junction block connector C-217 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If junction
block connector C-217 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between luggage compartment light connector F-02 (terminal 1) and ETACS-ECU connector C-226 (terminal 6) in good
condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the luggage compartment lights illuminate normally.
