Lancer L4-2.4L SOHC (2005)
STEP 3. Check the switch body.
Remove the turn-signal light and lighting switch and windshield wiper and washer switch. Then check continuity between the switch body terminals.
Q: Is the switch body in good condition?
YES: Go to Step 4.
NO: Replace the column switch. If the equipment, which are described in "CIRCUIT OPERATION", work normally, the input signal from the column
switch (windshield wiper and washer switch) should be normal.
STEP 4. Replace the ECU.
1. Replace the column switch (turn-signal light and lighting switch).
2. If the equipment, which are described in "CIRCUIT OPERATION", work normally, the input signal from the column switch (windshield wiper
and washer switch) should be normal.
Q: Does the column switch (windshield wiper and washer switch) send a normal signal to the ECU?
YES: No action is necessary and testing is complete.
NO: Replace the ETACS-ECU. If the equipment, which are described in "CIRCUIT OPERATION", work normally, the input signal from the
column switch (windshield wiper and washer switch) should be normal.
Inspection Procedure M-7
Column Switch: ETACS-ECU does not receive any signal from the windshield intermittent wiper interval adjusting knob.
