Lancer L4-2.4L SOHC (2005)
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. If the equipment, which are described in "CIRCUIT OPERATION", work normally, the input
signal from the hazard warning light switch should be normal.
ETACS-ECU Does Not Receive Any Signal From the Backup Light Switch M/T
ETACS-ECU does not receive any signal from the backup light switch <M/T>.
Backup Light Switch Input Circuit Part 1