Lancer L4-2.4L SOHC (2005)
STEP 2. Check rear door switch (LH) connector D-11 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is rear door switch (LH) connector D-11 in good condition?
YES: Go to Step 3.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT
OPERATION", work normally, the input signal from the rear door switch (LH) should be normal.
STEP 3. Check the rear door switch (LH).
Remove the rear door switch (LH). Then check continuity between the switch terminals.
Q: Is the rear door switch (LH) in good condition?
YES: Go to Step 4.
NO: Replace the rear door switch (LH). If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from the
rear door switch (LH) should be normal.