Lancer L4-2.4L SOHC (2005)
Lighting Part 2
LIGHTING
NOTE: When checking the input signals (off, tail, low-beam or high-beam), turn the ignition switch to the "ON" position in order to disable the
headlight automatic shutdown function. However, the headlight operation does not depend on the ignition switch positions, the scan tool does not display
the title "IGNITION SWITCH".
For checking item "HI (High-beam)", the scan tool displays "OFF" on the item number 2 "Dimmer SW" when the headlights are at high-beam.
Therefore, the scan tool should display "ON" momentarily when the dimmer switch is operated.
Turn Signal
TURN SIGNAL