Lancer L4-2.4L SOHC (2005)
Fuel Level Sensor: Testing and Inspection
Fuel Level Sensor Float Height
Fuel Level Sensor Float Height
1. Move the float and measure height A at point "F" (highest) and B at point "E" (lowest) with the float arm touching stopper.
Standard value:
-
A: 24.1 ± 2 mm (0.95 inch)
-
B: 151.6 ± 2 mm (5.97 inches)
2. Adjust the float arm to the standard value, then go to the thermistor check.
