mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel Tank Leveling Value Check|Page 2959 > < Main Relay (Computer/Fuel System)|Locations|Page 2954
Page 1
background image

Rollover Valve: Testing and Inspection
Fuel Tank Leveling Value Check

LEVELING VALVE CHECK

1. Place a drain pan, and disconnect the fuel filler neck breather hose at pipe side.

NOTE:  If fuel leaks from the fuel filler neck breather hose at this stage, the leveling valve may be defective.

2. Open the fuel tank filler cap, and fill the fuel tank up.
3. If fuel does not leak from the fuel tank filler neck breather hose with the fuel tank full, the leveling valve is normal. If not so, the leveling valve

may be defective. Lower the fuel tank from the vehicle and replace the valve.

4. Reconnect the fuel filler neck breather hose at the pipe side.

Fuel Tank Leveling Value Check|Page 2959 > < Main Relay (Computer/Fuel System)|Locations|Page 2954