Lancer L4-2.4L SOHC (2005)
^
Click on the check mark to continue.
^
If the PCM is already reprogrammed for this concern, this screen will display. If this message displays, do not continue with this
reprogramming procedure.
CAUTION
DO NOT DISTURB THE HARNESS CABLES OR CONNECTIONS. INTERRUPTION DURING THE PROGRAMMING PROCESS
COULD CAUSE THE PCM TO LOSE DATA OR PREVENT FUTURE PCM REPROGRAMMING.
g.
The CAN database screen will display.
^
(If more than one row is displayed in the table, select the appropriate ECU part number.)
^
Click on the check mark to begin reprogramming.
NOTE:
It will take up to 10 minutes to complete the reprogramming.
h.
This message will display when the reprogramming is successfully completed.
^
Go to Step 7 to complete this bulletin procedure.
8.
K-LINE FLASH VEHICLES ONLY:
a.
If you just transferred the new reprogramming data from the Reflash Update CD 7/06 to the MUT-III hard drive, now transfer the
