Lancer L4-2.4L SOHC (2005)
Seat Belt Control Module: Service and Repair
SRS CONTROL UNIT (SRS-ECU)
SRS Control Unit (SRS-ECU)
REMOVAL AND INSTALLATION
WARNING
-
Never attempt to disassemble or repair the SRS-ECU. If faulty, replace it.
-
Do not drop or subject the SRS-ECU to impact or vibration. If denting, cracking, deformation, or rust are discovered in the SRS-ECU,
replace it with a new SRS-ECU. Discard the old one.
-
After deployment of an air bag, replace the SRS-ECU with a new one.
-
Never use an ohmmeter on or near the SRS-ECU, and use only the special test equipment.
REMOVAL SERVICE POINT
[[A]] NEGATIVE ( ) BATTERY CABLE DISCONNECTION