mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Recall - PCM Reprograming for VSS/OBD Concerns|Page 408 > < Recall - PCM Reprograming for VSS/OBD Concerns|Page 406
Page 3
background image

Verify the new PCM part number and ROM IDs are the same as those listed.

10. Using a ball-point pen, enter the appropriate PCM part number, vendor number, ROM ID#, this recall bulletin number (EMR-05-002), your
dealer code, and the current date on the Engine Compartment / Control Module Label (p/n MSSF-024G-00).

11. Carefully remove all dirt and oil from a vacant area near the VECI label on the underside of the hood, and affix the Engine Compartment label.

12. Affix the Control Module label to the PCM.

13. FOR VEHICLES REGISTERED IN CALIFORNIA ONLY: Complete a "VEHICLE EMISSION RECALL -PROOF OF CORRECTION"
form (part number MSSF-106D-00). Give the completed form to the vehicle owner.

 

NOTE: These forms are available from Relizon.

WARRANTY INFORMATION

Claims for this campaign must be entered as recall Type "C" claims in the Mitsubishi Dealer Network (MDL). 

Campaign Operation: C0507ZXX

Labor Time: 0.3 hrs.

Sample claim screen views are not shown in this bulletin.

The information contained in this bulletin is subject to change. For latest version of this document go to the Mitsubishi Dealer Link, MEDIC, or
the Mitsubishi Service Information website.

Recall - PCM Reprograming for VSS/OBD Concerns|Page 408 > < Recall - PCM Reprograming for VSS/OBD Concerns|Page 406