Lancer L4-2.4L SOHC (2005)
Clutch Switch: Testing and Inspection
Interlock Switch Operating Check
INTERLOCK SWITCH OPERATING CHECK
1. Chock the front wheels, apply the parking brake.
2. After normally adjusting the clutch pedal, check the interlock switch operation as follows:
1) The engine should not start even if the ignition switch is turned to the "START" position with the clutch pedal released. If the engine should
start, check the interlock switch and the harness.
2) The engine should start after the clutch pedal is depressed and the ignition switch turned to the "START" position. If the engine should start
before the clutch is disengaged or the engine does not start even if the clutch pedal is depressed, check and adjust the interlock switch.
