Lancer L4-2.4L SOHC (2005)
Support the front axle No.1 crossmember with a transmission jack, and then remove the crossmember mounting nuts and bolts.
INSTALLATION SERVICE POINTS
>>A<< STABILIZER BAR INSTALLATION
Align the identification color on the left side of the stabilizer bar with the right end of the bushing.
>>B<< SELF-LOCKING NUTS INSTALLATION
Tighten the self-locking bolt until its protruding length meets the standard value.
Standard value (A): 22 ± 1.5 mm (0.87 ± 0.05 inch)
INSPECTION
^
Check the front axle No. 1 crossmember for cracks or damage.
