Lancer L4-2.4L SOHC (2005)
Trailing Arm Bushing: Service and Repair
TRAILING ARM BUSHING REPLACEMENT
Required Special Tools:
^
MB990890: Rear suspension bushing base
^
MB990947: Lower arm bushing arbor
^
MB991816: Bushing remover and installer base
1. Use special tools MB990947, MB990890 and MB991816 to drive out the trailing arm bushing.
2. Set the installation direction and installation location of the trailing arm bushing.
1) Place the long projection end of the trailing arm bushing inner pipe towards the inside of the vehicle.
2) Make sure that the hollow of the trailing arm bushing is located as shown in the illustration.
3. Using special tools MB990947, MB990890 and MB991816 press the trailing arm bushing into the position shown.