Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-1376004.png)
YES : Go to Step 5.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 5. Substitute a known good radio and CD player, and check the trouble symptom.
Check whether satellite radio broadcast can be received.
Q: Can a satellite radio be received?
YES : Replace the radio and CD player.
NO : Replace the satellite radio tuner.
STEP 6. Check satellite radio tuner connector C-18 and multivision display connector C-09 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Is satellite radio tuner connector C-18 or multivision display connector C-09 in good condition?
YES : Go to Step 7.
NO : Repair or replace the damaged component(s).
STEP 7. Check the wiring harness between satellite radio tuner connector C-18 (terminal 6, 14, 7) and multivision display connector C-09
(terminal 75, 77, 76).
-
Check the communication lines for open circuit and short circuit.
NOTE: Also check intermediate connector C-110 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If
intermediate connector C-110 is damaged, repair or replace the connector.
Q: Is the wiring harness between satellite radio tuner connector C-18 (terminal 6, 14, 7) and multivision display connector C-09 (terminal 75, 77, 76)
in good condition?
YES : Go to Step 8.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 8. Substitute a known good multivision display, and check the trouble symptom.
Check whether satellite radio broadcast can be received.
Q: Can a satellite radio be received?
YES : Replace the multivision display.
NO : Replace the satellite radio tuner.
Inspection Procedure 2
INSPECTION PROCEDURE 2: Check The Satellite Radio Tuner Power Supply Circuit.
CAUTION: Before replacing the satellite radio tuner, antenna feeder cable, ensure that the power supply circuit, the ground circuit and the
communication circuit are normal.
