Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Prepare a tool as shown to remove the door outside handle cover.
INSTALLATION SERVICE POINTS
]]A[[ DOOR CHECK INSTALLATION
Install the door check with the following identification marks facing upward.
]]B[[ DOOR INSIDE HANDLE INSTALLATION
When connecting the inside cable to the door inside handle, ensure that the door latch and the inside handle are locked.
]]C[[ DOOR OUTSIDE HANDLE BASE INSTALLATION
Prepare a tool as shown, and tighten it to the specified torque.
Tightening torque: 4.0 ± 2.0 N.m (35 ± 17 in-lb)