Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Parking Brake Lever: Removal and Replacement
PARKING BRAKE LEVER
REMOVAL AND INSTALLATION
CAUTION:
Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use
gloves which have grease on them.
Pre-removal & Post-installation Operation
Removal Steps 1-5
REMOVAL SERVICE POINT
[A] PARKING BRAKE REAR CABLE DISCONNECTION
Disconnect the parking brake rear cable according to the procedure below.
1. Release the parking brake, and loosen the adjusting nut.