Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-364004.png)
^
When inserting special tool into the timing chain case assembly inside, pay attention to the position of the timing chain to avoid damage to the
timing chain and timing chain tension side guide. Do not insert the special tool beyond its insertion guideline.
^
If unlocking the timing chain tensioner is insufficient, the special tool cannot be inserted to the insertion guideline. Do not insert the special tool
forcibly, follow Step 1 again to unlock the timing chain tensioner and insert the special tool.
2. With the timing chain tensioner unlocked, insert special tool MB992103 inside the timing chain case assembly along the tension side of the timing
chain until the insertion guide line aligns with the upper surface of the timing chain case assembly (Figure A).
NOTE: With the timing chain tensioner unlocked, insert the special tool M8992103 along the tension side of the timing chain, according to the
special tool M8992103 top shape. The special tool M8992103 can be inserted smoothly to the position where the special tool M8992103 insertion
guide line aligns with the timing chain case assembly top surface (Figure 8), and the spread timing chain tension side guide can be held (Figure C).
3. With the special tool MB992103 inserted up to the insertion guide line, press the special tool against the intake side camshaft sprocket and spread
and hold the timing chain tension side guide.
4. Remove the flat-tipped precision screwdriver unlocking the timing chain tensioner.
CAUTION:
