Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-1629001.png)
Combination Switch: Service and Repair
COLUMN SWITCH
REMOVAL AND INSTALLATION
CAUTION:
-
To remove the driver air bag module, refer to - Service Precautions and Driver's Air Bag Module and Clock Spring.
-
When the steering wheel sensor is replaced, always carry out calibration to make ASC-ECU learn the neutral point. (Refer to -
On-vehicle Service-Steering Wheel Sensor Calibration.)
Pre-Removal & Post-Installation Operation
Removal Steps 1-4
