Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Fluid Filter - A/T: Service and Repair
Oil Filter Removal and Installation
OIL FILTER
REMOVAL AND INSTALLATION
CAUTION
If a fluid leakage is present in the area around the oil filter bracket, clean around the oil filter bracket. After cleaning, warm up the engine.
Only if a fluid leakage is present in the area around the oil filter bracket again, replace the oil filter bracket assembly.
Pre-removal & Post-installation Operation
Removal Steps 1-4
REMOVAL SERVICE POINT
[A] TRANSMISSION FLUID DRAINING
Drain the fluid in the transaxle assembly and the oil cooler.
INSTALLATION SERVICE POINTS
[A] OIL FILTER BRACKET ASSEMBLY INSTALLATION
1. Completely degrease the oil filter bracket assembly installation surface on the transaxle side.