Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
2. Check the wiring harness between joint connector (CAN2) C-104 (terminal 7) and steering wheel sensor connector C-209 (terminal 3)
OK: Continuity exists (2 ohms or less)
3. Check the wiring harness between joint connector (CAN2) C-104 (terminal 20) and steering wheel sensor connector C-209 (terminal 4)
OK: Continuity exists (2 ohms or less)
Q: Is the wiring harness between joint connector (CAN2) C-104 and steering wheel sensor connector C-209 in good condition?
YES : Check the power supply circuit of the steering wheel sensor. Refer to Troubleshooting. See: Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures/C Code Charts/C121A
NO : Repair the wiring harness between joint connector (CAN2) C-104 and steering wheel sensor connector C-209.
Diagnostic Item 8
DIAGNOSTIC ITEM 8: Diagnose When The Scan Tool Cannot Receive The Data Sent By Shift Lever. [TC-SST]
CAUTION: When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a
component connected to the CAN bus line may be damaged.