Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-603096.png)
2. Check the wiring harness between joint connector (CAN2) C-104 (terminal 6) and ETACS-ECU connector C-301 (terminal 9)
OK: Continuity exists (2 ohms or less)
3. Check the wiring harness between joint connector (CAN2) C-104 (terminal 19) and ETACS-ECU connector C-301 (terminal 8)
OK: Continuity exists (2 ohms or less)
Q: Is the wiring harness between joint connector (CAN2) C-104 and ETACS-ECU connector C-301 in good condition?
YES : Go to Step 3.
NO : Repair the wiring harness between joint connector (CAN2) C-104 and ETACS-ECU connector C-301.
STEP 3. Using scan tool MB991958, diagnose the CAN bus line.
CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or
disconnecting scan tool MB991958.
1. Connect scan tool MB991958 to the data link connector
