Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
2. Check the wiring harness between joint connector (CAN1) C-105 (terminal 2) and satellite radio tuner connector C-18 (terminal 4)
OK: Continuity exists (2 ohms or less)
3. Check the wiring harness between joint connector (CAN1) C-105 (terminal 13) and satellite radio tuner connector C-18 (terminal 11)
OK: Continuity exists (2 ohms or less)
Q: Is the wiring harness between joint connector (CAN1) C-105 and satellite radio tuner connector C-18 in good condition?
YES : Check the power supply circuit of the satellite radio tuner. Refer to Diagnosis [Satellite radio tuner]. See: Accessories and Optional
Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Radio Tuner/Testing and Inspection/Symptom Related Diagnostic Procedures/Trouble
Symptom Chart
NO : Repair the wiring harness between joint connector (CAN1) C-105 and satellite radio tuner connector C-18.
Diagnostic Item 23
DIAGNOSTIC ITEM 23: Diagnose When The Scan Tool Cannot Receive The Data Sent By Hands Free Module.
CAUTION: When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a
component connected to the CAN bus line may be damaged.