Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-603151.png)
4. Measure the voltage between joint connector (CAN1) terminal 16 and body ground.
OK: 4.7 V or less
Q: Do all the voltages measure 4.7 V or less?
YES (vehicles without satellite radio) : Go to Step 23.
YES (vehicles with satellite radio) : Go to Step 22.
NO : Go to Step 32.
STEP 22. Check the wiring harness between joint connector (CAN1) C-105 and satellite radio tuner connector C-18 for a short to power
supply. Measure the voltage at joint connector (CAN1) C-105.
CAUTION:
-
A digital multimeter should be used.
-
The test wiring harness should be used.
1. Disconnect joint connector (CAN1), and measure the voltage at the wiring harness side of joint connector (CAN1).
2. Turn the ignition switch to the ON position.
3. Measure the voltage between joint connector (CAN1) terminal 2 and body ground.
OK: 4.7 V or less
4. Measure the voltage between joint connector (CAN1) terminal 13 and body ground.
OK: 4.7 V or less
Q: Do all the voltages measure 4.7 V or less?
YES : Go to Step 23.
NO : Go to Step 33.
STEP 23. Check the wiring harness between joint connector (CAN1) C-105 and ETACS-ECU connector C-301 for a short to power supply.
Measure the voltage at joint connector (CAN1) C-105.
CAUTION:
