Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
3. Measure the resistance between joint connector (CAN1) terminal 24 and body ground.
OK: 1 kohms or more
Q: Do all the resistances measure 1 kohms or more?
YES (vehicles without hands free system) : Go to Step 8.
YES (vehicles with hands free system) : Go to Step 7.
NO : Go to Step 52.
STEP 7. Check the wiring harness between joint connector (CAN1) C-105 and hands free module connector C-11 for a short to ground.
Measure the resistance at joint connector (CAN1) C-105.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 10 and body ground.
OK: 1 kohms or more
3. Measure the resistance between joint connector (CAN1) terminal 23 and body ground.
OK: 1 kohms or more
Q: Do all the resistances measure 1 kohms or more?
YES : Go to Step 8.