Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
OPTION CODING
CAUTION:
^
If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds
with the equipment content. Functions and systems do not work normally if the setting does not correspond with the equipment.
^
With the ETACS functions being customized, if any of the ETACS-ECU variant coding and option coding items are changed, the
customized contents are reset. In such case, the functions need to be recustomized. The ETACS-ECU option coding data can be checked
or changed by operating scan tool MB991958.
^
How to check option coding data
1. Connect the scan tool MB991958.
2. Turn the ignition switch to the "ON" position.
3. Select "System select" from the start-up screen.
4. Select "From 2006 MY" under "Model Year". Check that "Vehicle Information" contents are correct.
5. Select "ETACS" from "System List", and then press "OK" button.