mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

All Other Service Bulletins for Control Module: > < Drivetrain Controls - MIL ON/DTC C161E Set|Page 351
Page 9
background image

Click on the "Home" icon at the bottom left of the screen.

2. Disconnect the MUT-III and the battery charger.

3. Start the engine and check for the "SERVICE REQUIRED" warning light. If the light stays on after the self-check, check for DTCs. Refer to the

service manual for appropriate DTC troubleshooting procedures.

WARRANTY INFORMATION

This bulletin is supplied as technical information only and is not an authorization to repair. If an affected vehicle is reported with the described condition,
diagnose the condition, repair as described in this bulletin and submit a normal warranty claim using the following information.

AWC ECU Reprogramming for DTC C0161

Nature Code: 605

Cause Code: 990

Labor Operation No.228511 BQ Time Allowance: 0.3 hr.

Warranty Coverage: 8 years / 80,000 miles Emissions warranty

All Other Service Bulletins for Control Module: > < Drivetrain Controls - MIL ON/DTC C161E Set|Page 351