Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Side Air Bag: Service and Repair
Side-Airbag Modules
SIDE-AIRBAG MODULES
REMOVAL AND INSTALLATION
WARNING:
-
Never attempt to disassemble or repair the side-air bag modules. If faulty, replace it.
-
Do not drop the side-air bag modules or allow contact with water, grease or oil. Replace it if a dent, crack, deformation or rust is
detected.
-
Do not expose the side-air bag modules to temperatures over 93 °C (200 °F).
-
After deployment of the air bag, replace the air bag module with a new one.
-
Wear gloves and safety glasses when handling air bags that have already deployed.
-
An undeployed side-air bag module should only be disposed of in accordance with the procedures.
-
When removing and installing the front passenger seat, be sure to carry out accuracy check occupant classification sensor after the seat
has been installed in the vehicle.
Pre-Removal Operation