Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
1. Turn the ignition switch to "ON" position.
2. Operate each switch of the steering remote control. Check whether the normal conditions listed below are displayed.
OK: Normal condition is displayed.
Q: Is the check result normal?
YES : Go to Step 9.
NO : Go to Step 2.
STEP 2. Check the steering wheel audio remote control switch.
Remove the steering wheel audio remote control switch. Then check continuity between the switch terminals.
Q: Is the steering wheel audio remote control switch in good condition?
YES : Go to Step 3.