Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
Ignition Switch: Service and Repair
IGNITION SWITCH
REMOVAL AND INSTALLATION
CAUTION:
-
Before removing the steering wheel assembly, refer to - Service Precautions and Driver's Air Bag Module and Clock Spring [Vehicles
with WCM].
-
After the installation, perform a calibration for the ASC-ECU to learn the steering wheel sensor neutral point (Refer to On-vehicle
Service - Steering Wheel Sensor Calibration). [Vehicles with WCM and ASC]
Pre-Removal And Post-Installation Operation